.png){kind=small}
Al Bunnia
Cold Asphlat MIX (CAS–R25)
Specialists in the Manufacture of Cold Asphalt
for Maintenance Purposes Only
Product identifier: COLD ASPHALT MIX
Chemical Name: Mixture
Trade Name(s): CAS–R25
Packing: 25 KG / Bag
Expiry Storage: 18 Month
Relevant identified uses of the substance or mixture and uses advised against
Identified Use(s) Road Maintenance
Uses Advised Against None
Company Identification:
Al Bunnia Contracting and Trading and Production of Raw Materials LLC.
Headquarters: Sultanate of Oman – Muscat- Al Jaffnain.
Commercial Register: 1393691
Phone: 0096896587970
Website: Albenya.com
Email: info@albenya.com
25 KG / Bag covers an area of around (45 CM length × 45 CM widths × 5 CM depth).
The area is covered by one cold asphalt bag of 25 kg Approximately:
For more information, choose a means of communication.
Contact us via WhatsApp
Chat on WhatsAppContact us via messages
Send your inquiriesOur Cold Asphalt Features
Easy To Use
Environment Friendly
25 KG Bags
Need Simple Equipment
Easy To Transfer
Doesn’t disrupt traffic
armed with fiberglass
Holds together after tamping
Any Weather +25°C
Easy To Trade
HOW TO USE (CAS–R25)
First Step
Clean the hole well
Second Step
Raise the asphalt level by 4 – 5 cm and compact it manually, then begin the compaction process
Third Step
Compact the hole well, then use the road immediately
How To Storage
One Pallet Per Stack
It is forbidden to stack the pallet on top, meaning a maximum of one pallet per stack.
Closed Warehouse
Store in a closed warehouse and do not expose the stock to the sun to avoid damage to the product.
Wooden Pallet
It is stored on a wooden pallet of 40 bags per pallet.
Packing
The packaging is carried out in 25 kg bags made of polyethylene.
INFORMATION ON INGREDIENTS
| Composition/information on ingredients | % wt | CAS No |
|---|---|---|
| Aggregate (crushed stone, sand, gravel) | > 85 | Various |
| Silica sand Or Quartz sand | < 5% | 14707-60-7 / 14808-60-7 |
| Petroleum asphalt / bitumen | < 5% | 8052-42-4 |
| Additives + Fiberglass + Filer | < 5% | Various |
LAB RESULTS
Ref | Method | Result Range | |
Binder Content (%) | ASTM D 2172: 17 | 5.0-5.2 | |
Marshall Criteria @ | Stability (N) Flow (MM) | ASTM D 1559: 89 | 26105 2.6 |
Marshall Criteria @ | Stability (N) Flow (MM) | ASTM D 1559: 89 | 11728 2.9 |
Bulk Density | ASTM D 1559: 89 | 2.4 | |
% voids in Mix (VIM) | 5.1 |
HAZARDS IDENTIFICATION
OSHA HCS (29 CFR 1910.1200) / GHS Classification Eye Irrit. 2; Skin Sens. 1b
Signal Word(s) WARNING
Wear protective gloves /eye protection. Wash hands and exposed skin after use.
Classification of the substance or mixture
Hazard Symbol
It May cause serious eye irritation. May cause an allergic skin reaction. Precautionary Statement(s)
FIRST AID MEASURES
Description of first aid measures
Inhalation Not normally required
Move person to fresh air
Apply artificial respiration if necessary
If symptoms persist, obtain medical attention
Skin Contact Gently wash with plenty of soap and water
If irritation (redness, rash, blistering) develops, get medical attention
Eye Contact Flush eyes with water for at least 15 minutes while holding eyelids open
Remove contact lenses, if present and easy to do
Continue rinsing. If irritation develops and persists, get medical attention
Ingestion Not normally required. Do not induce vomiting
Do not give anything by mouth to an unconscious person.
Get medical advice/attention if you feel unwell.
Indication of any immediate medical attention and special treatment needed.
The most important symptoms and effects, both acute and delayed may cause an allergic skin reaction.
OTHER INFORMATION
Description of first aid measures
Al Bunnia reserves the right to change or modify the data without prior notice.
All reasonable care has been taken in compiling the data that to the best of our knowledge is accurate and true.
All recommendations are made in good faith.
No responsibility can be accepted by us and no warranty is implied with regards to any of the recommendations made in the data sheets, since the condition of actual use and the labor involved are beyond our control.
The products are warranted against manufacturing defects only and sold subject to Al Bunnia Company’s standard terms and conditions of sale.
Certificate
